Philips ErgoFit Beutelloser Staubsauger - Manual (Page 14)

reminder to clean the filter cylinder
You have to clean the filter cylinder after each vacuuming session. This
prevents the filter cylinder from clogging and helps maintain optimal
suction power.
- If you fail to clean the filter cylinder a number of vacuuming sessions in
a row, the filter light flashes for 15 seconds.
Cleaning and maintenance
Cleaning the dust bucket and filter cylinder unit
Always unplug the appliance before you empty the dust bucket.
The dust bucket is not dishwasher-proof.
Empty the dust bucket as soon as the dust level has reached the round disc
of the filter cylinder case.
1 Switch off the appliance and remove the mains plug from the wall
socket.
2 To disconnect the hose, press the release button (1) and pull the
hose out of the appliance (2).
3 To unlock the cover, press the cover release button. Swing open the
cover.
4 Lift the dust bucket out of the appliance.
5 Press the release button for the filter cylinder unit on the bucket
handle (1) and remove the filter cylinder unit (2).
6 Hold the dust bucket over a dustbin and empty it.
7 Clean the dust bucket with cold tap water and some washing-up
liquid.
15 sec. 15 sec.
English
14