S t e p – Body Solid G6B User Manual
Page 40
Be careful to assemble all components
in the sequence they are presented.
mm
Inch
SEE NOTE 1 ON PAGE 41:
A.
Apply weight stack numbers to weight stack Top Plate (17) and each Weight Stack Plate (38)
as shown.
SEE NOTE 2 ON PAGE 41:
B.
Weight Stack Shroud (DA) is pre-assembled with Shroud Insert (DB).
Attach Weight Stack Shroud (DA) to the side of the weight stack as shown.
Bolt onto Main Base Frame (A) at the bottom and Top Weight Stack Frame (G) using:
Two 89 (3/8” x 5/8” round allen head)
Two 74 (3/8” washer)
C.
Attach Back Weight Stack Shroud (DC), to the back side of the weight stack, onto the Main Base
Frame (A) at the bottom and to the Top Weight Stack Frame (G) as shown using:
Two 89 (3/8” x 5/8” round allen head)
Two 74 (3/8” washer)
D.
Attach Press Arm Shroud (DD) to the Seated Press Arm Support (H) using:
Four 90 (1/8” x 3/8” round allen head)
E.
Connect the Water Bottle Bracket (91) to the Weight Stack Shroud (DA) using:
Two 92 (1/8” x 3/8” screw)
F.
Slide the Water Bottle Holder (93) onto the Water Bottle Bracket (91) as shown.
40
S T E P
16