BIXOLON 352plusA - Manual (Page 35)

Rev. 2.01 - 35 -
SRP-350/352plusA&C
4-3-2 RESET Circuit
Reset signal is signal in order to start-up CPU under Power-on.
Reset circuit uses a reset ASM811REUSF-T(U8). When 3.3Vdc is fallen under 2.7Vdc by Power-off,
reset signal prohibits the system from miss-operating by lowering down to 0V.
[Figure 4-4 Reset Block Diagram]
[Figure 4-5 Reset Waveform]
ASM811
REUSF-T