BIXOLON 352plusA - Manual (Page 46)

Rev. 2.01 - 46 -
SRP-350/352plusA&C
Screw 1
Heatsink Assy 2
1.Remove the screw.
2.Push the Heat-sink Assembly in
the direction of an arrow and
Separate it.
Screw (3x4) 4
Plate ground 2
Brkt TPH Rear
Heat Sink 6
Screw (3x4) 1
Spring TPH 5
Connector 7
3
1.Remove the screw.
2.Separate the Plate-ground and
BRKT TPH Rear.
3.Remover the two screws.
4.Separate the Heat-sink and the
Spring TPH.
5.Separate the Connector from the
Heat-sink.