BIXOLON 352plusA - Manual (Page 49)

Rev. 2.01 - 49 -
SRP-350/352plusA&C
6-1-2 Paper Jam
If the paper jam occur, the Buzzer will beep. If the cover-open can be opened, open the
Cover-open and remove the paper.
If the Cover-open can not be opened, Follow the below.
1. Turn the printer on to make the cutter initialized, and then open the cover-open.
2. In case that the cutter is not initialized, remove the cover-cutter then remove the paper jam
with turning the knob to the arrow direction as shown below picture. You may use a cross
screwdriver to remove the paper jam.
3. After the cutter placed back, and then press the push button to open the cover.
4. Assemble the cover-cutter.