Philips Kaffeevollautomat - Manual (Page 18)

2 Place a cup under the spout.
3 Press the button for hot water until the message ‘PROGRAM TO
SET VOL - HOT WATER’ appears on the display and then release it.
, Hot water comes out of the hot water spout.
4 When the water in the cup reaches the required level, press
the button for hot water again to set the new quantity.
, ’SETTING DONE’ appears on the display. The appliance now
produces the set quantity until you change it again.
adjusting the coffee mill
The coffee grinder is preset to the correct coarseness and should not
require frequent adjustment. You can select a coarser setting for less foam,
a normal aroma and faster brewing. You can select a finer setting for more
foam, a more intense aroma and slower brewing.
Only turn the grinding coarseness knob when the coffee mill is grinding.
- To select a coarser setting, turn the grinding coarseness knob 1
setting clockwise (‘click’).
- To select a finer setting, turn the grinding coarseness knob 1 setting
anticlockwise (‘click’).
Do not turn the grinding coarseness knob anticlockwise too far,
otherwise the coffee may come out of the spout in drops when you
brew 2 cups.
The adjustment only becomes noticeable after you have brewed at least 2
cups of coffee.
EnglisH
18
4222.002.6507.7.indd 18 31-08-09 17:45