TC Electronic VSS3 TDM - Manual (Page 17)

VSS3 / 17
EE
NN
GG
LL
II
SS
HH
RevMod Width
Range: 0% to 200%
Sets the Width of the modulation.
Space Modulation
The space modulation part imitates the air movement of a room, and this is one of the
things that make the VSS3 very good at simulating the complex patterns of natural
rooms. You can adjust the modulation type's rate, width and depth.
SpcMod Type
(Off, Normal, Fast, Slow, MidFreq, Sync)
Selects the type of Space Modulation.
SpcMod Rate
Range: -100, default, +100
Allows you to offset the speed of the LFO from the factory default assigned to each
type.
SpcMod Width
Range: 0 to 100%
Sets the width of the modulation.
SpcMod Depth
Range: -50, default, +50
Allows you to offset the amount of space modulation from the factory default.