TC Electronic VSS3 TDM - Manual (Page 9)

VSS3 / 9
EE
NN
GG
LL
II
SS
HH
The Plug-In Parameters
The plug-in parameters are spread amongst 4 User Interface pages. They are grouped
into the most important parameters on the Main page, the parameters relevant for the
Early Reflections, the Reverb Tail and finally for Modulation.
Main
On the VSS3 Main page, we have grouped the most important parameters of the
VSS3. Also, on this page you can find the plug-ins preset handling. More about the
preset handling can be found in the section "Preset Handling" later in this manual.
Decay
Range: 0.1 to 20s
The Decay time of the Reverb. Usually associated with the time it takes the Reverb
Tail to decay 60dB. This is the overall Master Decay for the four band Decay parame-
ters (found in the REVERB section below) which are multiples of this base Reverb
time.
Rev Delay
Range: 0 to 200ms
A delay to the diffuse field part of the Reverb. Adds additional time between the Early
Reflections and the onset of the "diffuse field" of the Reverb.