BT RELATE 3000 - Manual (Page 12)

Making and ending calls
1. Lift the handset and dial.
2. Replace the handset to end the call.
Preparatory dialling
See the number displayed before you dial.
1. Enter the number first. Lift the handset – or press –
or press then press .
Receiving calls
When you receive a call the phone will ring and the ringer
light will flash. The display shows the number of the caller
(providing you have subscribed to your network’s Caller
Display service. See page 20).
1. Lift the handset and speak.
Handsfree
By using the loudspeaker and microphone built into the base,
you can make and receive calls without picking up the handset.
Make a handsfree call
1. Press . The handsfree light comes on and you can
hear the dialling tone.
12
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
Using the phone
Dialling numbers quickly
Numbers can also be dialled using
the Quickdial buttons (page 15), the
directory (page 18), from the redial
list (page 13) and from the calls list
(page 20).
If you make a mistake, lift and
replace the handset and dial again.
Please note
During a handsfree conversation,
you can pick up and use the handset,
or use a headset, at any time.
HEARING AID COMPATIBILITY
As this telephone is fitted
with an Inductive Coupler,
hearing aid wearers may
benefit from switching their hearing
aid to the middle ‘T’ position and
holding the earpiece up to the aid,
not their ear.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 12