BT RELATE 3000 - Manual (Page 15)

1571
If you subscribe to your network’s answering service, for
example BT Call Minder, the
button gives you easy,
one-touch access.
When you have a message waiting the button will
flash. The button may also flash, e.g. if you are using
Call Diversion.
1. Lift handset and press to dial your network’s answering
service.
Or, just press to dial in handsfree.
M1– M3 Quickdial buttons
You can store a phone number and name under each of the
three Quickdial buttons –
( M1 ), ( M2 ) and ( M3 ).
Storing
1. Press . Display shows WHERE?.
2. Press a Quickdial button ( M1 , M2 or M3) under which you
want to store the entry. Display shows ENTER NUMBER…
then STORE.
3. Enter the phone number and press . Display shows
ENTER NAME… then STORE.
Using the phone 15
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
IMPORTANT
To use 1571 you must first subscribe
to the service from your network
provider. You may be charged a fee.
For more information on BT’s
answering services and other BT
Calling Features, call BT on Freefone
0800 800 150.
You may choose to turn the
detection off, see page 25.
It is possible to store a number under
each of the 3 Quickdial buttons,
unless M3 = Recall, see page 25.
Names can be up to 12 characters
long and numbers up to 21 digits.
Quickdial Memory label
Keep a note of stored numbers on
the quickdial memory label.
Entering names
Use the keypad letters to enter
names, e.g. to store TOM:
Press 8 once to enter T.
Press 6 three times to enter O.
Press 6 once to enter M.
To edit or delete letters or numbers
you can use the
or button to
scroll between the letters and
numbers.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 15