BT RELATE 3000 - Manual (Page 24)

VIP ringer
This lets you switch ON or OFF a different ring tone that
sounds whenever you receive calls from one of the
names/numbers stored in the directory or quickdial
memories, see page 18. The factory setting is off.
Voice prompts
Your BT Relate 3000 has voice prompts to help you use
your phone’s features more easily. You can switch these
voice prompts
ON or OFF . The factory setting is OFF .
Beeps tones
Your phone beeps when you press a button. You can switch
these beeps
ON or OFF . The factory setting is On .
Call amplifier
Your can either adjust the volume of your caller’s voice in
the earpiece (incoming) or the volume of your voice
(outgoing) so that your caller can hear you more clearly.
The factory setting is to adjust the volume of INCOMING calls.
Personalise your phone 24
BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346
When in handsfree mode you will
only be able to adjust the volume
level of the caller’s voice.
We suggest you set the call amplifier
to the lowest audible level to avoid
the amplified volume being too loud.
Voice prompts will not be heard if
the mains power is not connected
and switched on. If you do not
intend to use mains power with the
telephone, ensure voice prompts
are switched off to prolong the
battery life.
6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 24