Location, Install the batteries, Connect the mains power adap – BT RELATE 3000 User Manual

Page 6: Getting started

Advertising
background image

Getting started

WARNING

Do not place your BT Relate 3000 in
the bathroom or other humid areas.

Location

Make sure your BT Relate 3000 is close enough to a
telephone socket so that the cable will reach.

Install the batteries

1. Turn the phone over, remove the battery compartment

cover, then insert the 4 AA alkaline batteries as indicated.

2. Replace the battery cover.

Connect the mains power adaptor

1. Plug the mains power adaptor into the POWER socket on

the base of your BT Relate 3000.

6

BT Relate 3000 ~ Issue 3 ~ Edition 02 ~ 12.08.04 ~ 6346

Battery low warning

When your batteries need replacing
the battery low icon is displayed.

Replace the batteries by following
the steps for battery installation.

Battery performance

New batteries will power your
BT Relate 3000 display for approx.
18 months provided you are also
using the mains adaptor to power
your BT Relate 3000. If you do not
use the power supply then the
battery life is approximately 6 months.

Even if your batteries run out or are
removed, your BT Relate 3000 will
retain any personalised settings for:

One-touch Quickdial memories

Display contrast

Voice prompt

VIP ringer

Loudspeaker volume

Ring tone

6346 Relate 3000 UG [2] 12/8/04 11:19 am Page 6

Advertising