Binatone SC2050 - Manual (Page 18)

17
CORDLESS HANDSET
Binatone Help Line: 0845 345 9677
Making and answering calls
During a call, to adjust the volume in the
cordless handset’s earpiece or speakerphone:
1 Press the VOLUME button
The display shows the current volume level
(1 to 5 ) as a number of small circles
2 Press the VOLUME button repeatedly to
cycle through the volume levels
(1, 2, 3, 4, 5, 1, 2, etc.)
The cordless handset will stay at this volume
level until you change the volume again.
You have a choice of five ringing volume levels,
or you can turn the ringer off altogether.
While the handset is idle (not busy on a call):
1 Press the VOLUME button briefly
The display shows the current volume level
(Off, 1 to 5 ) as a number of small circles, and
the handset rings at that level.
2 Press the RIGHT or LEFT button briefly to
change the volume
3 Press the VOLUME button again to confirm
Ringer
volume
You have a choice of nine ringing melodies.
While the handset is idle (not busy on a call):
1 Press the VOLUME button and hold it for
about 3 seconds
The display shows the current ringer (1 to 9 )
2 Press the RIGHT or LEFT button briefly to hear
the different ringer melodies
When you reach the melody you prefer:
3 Press the VOLUME button again to confirm
Ringer
melody
Earpiece
volume