Binatone SC2050 - Manual (Page 21)

You can store up to 10 numbers in each cordless
handset’s memory, in memory locations 0 to 9. Each
number can have up to 24 digits.
Memory dialling
To store a
number Make sure the handset is idle (not connected on
a call).
1 Press the MEMORY button and hold it for
about 2 seconds until the
symbol flashes on
the display with a cursor (small dash) flashing
above it
2 Key in the number you want to store
If you key in any wrong digits, you can press
the MUTE/DEL button to delete them
from the display.
3 Briefly press the MEMORY button again
The phone number moves to the right on
the display, and the cursor flashes on the left.
4 Key in a memory location number (0 to 9)
You hear a confirmation tone and the display
goes back to standby mode. The number is now
stored.
5 Make a note of the number you have stored
There’s a list at the end of this guide.
20 Binatone Help Line: 0845 345 9677
CORDLESS HANDSET