Binatone SC2050 - Manual (Page 7)

6
Comes on steadily when your handset is within range of the
base unit. It flashes if you go out of range. Signal
level
What the symbols mean
Appears when you make an intercom call to another
handset. Intercom
call
Appears when you press the MEMORY button to store
a number in memory or to make a call to a stored number.
Memory
Indicates the handset ringer is turned off.
Flashes when you have received new call/s. On steady when
there are only old calls in the calls list. Caller ID
(CLIP)
Appears when the keypad is locked.
Keypad
lock
When this shows nearly empty ( ), put the handset on
the charger pod to charge the batteries.
While the handset is on the charger pod, the bars on this
symbol move continuously, even when the batteries are fully
charged.
Battery
charge
On steady when the handset is on an outside call. Flashes
when there is incoming ringing.
The appears when the microphone is muted. X
Phone
Appears when the Handsfree function is turned on.
Speaker-
phone
Ringer Off
Left/Right
arrow When a number is too long for the display, these show
that you can press the
or buttons to scroll.