Boca Research Turbo Series - Manual (Page 20)

20
IO Turbo Series
Windows 95 Users
Depending on the version of Windows 95 you have, devices
are detected and installed in slightly different ways. When
the adapter is physically installed, start Windows 95 as you
normally would. NOTE: Some versions of W
NOTE: Some versions of W NOTE: Some versions of W NOTE: Some versions of W NOTE: Some versions of Windows 95 may indows 95 may indows 95 may indows 95 may indows 95 may
prompt you for the path of your drivers. T prompt you for the path of your drivers. T prompt you for the path of your drivers. T prompt you for the path of your drivers. T prompt you for the path of your drivers. Type in your ype in your ype in your ype in your ype in your
diskette drive path (e.g., A:\) diskette drive path (e.g., A:\) diskette drive path (e.g., A:\) diskette drive path (e.g., A:\) diskette drive path (e.g., A:\)
You will be prompted with either “The Update Device Driver
Wizard” or “The New Hardware Found Dialog Box”.
Continue as appropriate.
The Update Device Driver Wizard
• In this case, simply insert the driver diskette, click Next Next Next Next Next ,
then Finish Finish Finish Finish Finish . The Wizard will automatically locate the
correct drivers and install them. If it does not, it will ask for
the location of the driver.
• Depending on the card you are installing, the Wizard will
detect a number of logical devices:
• ECP Printer Port A and B
• High-Speed Communications port A and B
• Boca I/O Adapter (this is the controller device for the
card; double-click to change ports, speed)
• Parallel Port Controller
• Serial Port Controller
• Continue as instructed to complete Windows 95
configuration and see page 22.
9361.p65 2/11/99, 11:02 AM 20