Boca Research Turbo Series - Manual (Page 24)

24
IO Turbo Series
• If an exclamation point is displayed next to a • If an exclamation point is displayed next to a • If an exclamation point is displayed next to a • If an exclamation point is displayed next to a • If an exclamation point is displayed next to a
Communications Port, or if you wish to change resources: Communications Port, or if you wish to change resources: Communications Port, or if you wish to change resources: Communications Port, or if you wish to change resources: Communications Port, or if you wish to change resources:
1. Change resources for existing devices.
2. Click on a listed COM Port device. Go to Properties and
“Disable in This Hardware Profile” “Disable in This Hardware Profile” “Disable in This Hardware Profile” “Disable in This Hardware Profile” “Disable in This Hardware Profile” under the General
tab. When you return to Device Manager, a red X is
displayed next to the device you just disabled.
3. Free up an IRQ. Check with the hardware manufacturer
of the device you want to remove.
NOTE: NOTE: NOTE: NOTE: NOTE: If you make any changes in Device Manager, shut
down your system when done, power off, then power back
on your computer.
9361.p65 2/11/99, 11:02 AM 24