Boca Research Turbo Series - Manual (Page 19)

19 19 19 19 19
Section Three: Windows 98/95 Configuration
Before Y Before Y Before Y Before Y Before You Begin: ou Begin: ou Begin: ou Begin: ou Begin: If your computer’s BIOS includes an
option to allow your operating system to configure Plug and
Play devices, you should select this option. This will Allow
Windows 98/95 to configure the IO Adapter. (Note: on some
Award BIOS’s, this will be a setting called “Resources
Controlled By:”; select “Automatic”
.
Make sure the IO adapter has been installed in your
computer.
Windows 98 Users
Windows 98 presents a checklist of possible sources for the
driver. Simply check “diskette” and follow all-on-screen
directions to complete Windows 98 configuration. The
Wizard will detect a number of logical devices:
• ECP Printer Port A and B
• High-Speed Communications port A and B
• Boca I/O Adapter (this is the controller device for the card;
double-click to change ports, speed)
• Parallel Port Controller
• Serial Port Controller
Driver Installation
9361.p65 2/11/99, 11:02 AM 19