B&B Electronics ESP904 - Manual (Page 16)

Installing the VLINX ESP Software
Manual Documentation Number: ESP904-0504 Chapter 3 21
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Figure 16. The Install Shield Wizard Complete Window
Step 4: Select Finish when the Install Shield Wizard Complete window
appears.
After Finish, the Install window closes.
Step 5: Start the ESP Manager software:
Start → Programs → B&B Electronics → VLINX → ESP Servers
→ VLINX ESP Manager .
Step 6: If the ESP904 is not already connected to the network or to the
Ethernet port on the computer, connect it, and then apply power.
The Power indicator should light Red, the Link light should indicate
which type of Ethernet connection has been made and the Ready
LED will flash indicating configuration can begin.
Installing the VLINX ESP Software
22 Chapter 3 Manual Documentation Number: ESP904-0504
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com