Hookup and installation – Belkin PURE AV PF50 User Manual
Page 15
14
Hookup and Installation
Step 7
Connect Audio Components to the Audio Filter
The PureAV Power Console contains an isolated audio filter that
is optimised to clean and condition the power to all of your audio
components. The audio filter also isolates your audio components from
connected digital, video, and high-current audio components.
A. Attach PureAV power cable labels to each component’s power cable
before you plug the cable into the sockets on the Power Console.
B. Connect the power cables of your audio components to any socket
labeled under the “Audio Filter”. Examples of the most common audio
components are listed below:
1.
Tape Player
2.
Receiver (Preamp)
3.
Turntables
Note: You can connect any type of audio component into any of the
audio filter sockets. You are not limited to the components
listed above.
PureAV
Power
Console