Belkin PURE AV PF50 - Manual (Page 19)

18
PureAV
Power
Console
Hookup and Installation
Step 11
Connect your Broadband Ethernet Line
Your PureAV Power Console comes equipped with broadband Ethernet-
line protection. These are standard RJ45 Ethernet ports and they are
labeled “Network”.
A. Connect one end of an RJ45 network patch cable to a network port
(either directly to a router or wired network wall port). Connect
the other end of the network patch cable to the network port
labeled “IN”.
B. Connect one end of the broadband Ethernet cable (included) to the
network port labeled “OUT”. Connect the other end of this cable to
the networked device (digital media receiver, gaming console, etc.)
Note: We have included labels for the “Network IN” and “Network OUT”
lines, if needed, for better organisation.
�����������
�����