Belkin PURE AV PF50 - Manual (Page 16)

15
PureAV
Power
Console
Hookup and Installation
Step 8
Connect High-Current Audio Filter
The HiCurrent socket is specifically designed to filter out AC line noise
while delivering maximum current to power-hungry amplifiers and other
high-current audio components.
Note: This socket bank should be programmed for “Delay”. This allows
your high-current amplifiers to turn on last and turn off first,
avoiding that annoying, and potentially damaging “thump” from
getting to your speakers.
A. Attach PureAV power cable labels to each component’s power
cable before you plug the cable into the HiCurrent socket on
the Power Console.
B. Connect your high-current device into the “HiCurrent Filter”.
Examples of the most common high-current components are
listed below:
1. Amplifiers
2. Powered Sub-Woofers
3. Electrostatic Speakers
Note: You can connect any type of high-current audio component
into any of the high-current sockets. You are not limited to the
components listed above.