Belkin PURE AV PF50 - Manual (Page 17)

16
Hookup and Installation
Step 9
Connect your Pay-Per-View/Phone Line
Your PureAV Power Console comes equipped with Pay-Per-View/phone-
line protection with a built-in splitter. These are standard BT RJ11 phone
ports and are labeled “Phone”.
A. Connect one end of your telephone cable to the wall port to which
you normally connect your phone line. Connect the other end of
your telephone cable to the Power Console phone port labeled “IN”.
B. Connect one end of the PureAV phone cable (included) to the Power
Console phone port labeled “OUT”. Connect the other end of this
cable to the Pay-Per-View phone port on your cable TV or
satellite receiver.
C. To connect a telephone – Connect one end of another phone cable
to the other Power Console phone port labeled “OUT”. Connect the
other end of this cable to the telephone you want to use.
Note: We have included labels for the “Phone IN” and “Phone OUT”
lines, if needed, for better organisation.
�����������
�����
PureAV
Power
Console