Philips 741415008 - Manual (Page 13)

B C
D E
A
Never place electrical parts of the
machine in or near water: danger of
electrical shock! Never direct steam or hot
water spray toward the body: danger of
burns! Use caution when using the
steam/hot water tube: very warm
surface may be hot to the touch!
Use the machine only for the purpose
for which it has been manufactured.
This espresso machine has been manufactured
for household use only. Do not use the machine
for any other purpose or attempt to carry out
technical modifications to the machine.
Caution
This espresso machine should be used only by
adults who have read this instruction manual.
Power supply
Never touch electrical parts: danger of shock!
Make sure the power of the electrical outlet
corresponds to the power indicated on the rating
plate of the machine.
Power cord
If the power cord is damaged, do not
attempt to use the machine. Contact your
local dealer or an authorized service
center.
Make sure the power cord is not placed near
hot or sharp surfaces. Do not allow the cord to
hang freely and do not place the cord near oil.
Do not pull on the cord to move the machine.
Do not yank on the cord to unplug the machine.
Never touch the power cord with wet hands.
24 25
SAFETY PRECAUTIONS
Keep out of the reach of small
children
Do not allow small children to play near the
machine or with the machine.
Location of the machine
Place the machine on a stable, flat surface.
Do not place the machine outside or near hot
surfaces or flames.
Danger of burns
Avoid pointing the steam or hot water toward
the body or hands. Use caution when touching
machine parts that become hot when the
machine is on or operating.
Area around the machine
For the proper functioning of the machine, it is
recommended to place the machine on a
stable, flat surface and in a well-lit, spacious
area.
Cleaning
Before cleaning the machine, make sure that
the machine is turned off and that the power
cord is unplugged. Wait until the machine has
cooled. Never immerse the machine in water.
Do not attempt to disassemble or modify any
internal components of the machine.
Repairs / Maintenance
In the case of suspected operational problems,
defects or faults, unplug the machine
immediately. Never attempt to use a defective
machine. Repairs should be carried out only
by authorized service centers. The manufacturer
declines any responsibility for the machine and
its components and accessories for repairs
made by unauthorized personnel.
Fire
In the case of a fire, use a carbon dioxide (CO
2
)
based extinguisher. Do not use water or powder
extinguishers.
A
C
D
E
B