Heater Craft 700 Yamaha Rhino - Manual (Page 3)

MOUNT HEATER UNIT:
Install brackets as shown using provided #8-32 screws
provided.
Remove the Passenger/Driver’s seats, kick panels, console, and
engine cover.
Slide open ended heater mounting bracket (passenger side)
under loosened seat base bolt and secure by tightening. (vent
outlets will face forward)
Secure the opposite (driver’s side) bracket by sandwiching the
slotted tab between the plastic side panel and the skid plate.
Insert the supplied #10-32 x 3/4” bolt in remaining slot in
mounting bracket and secure with provided lock nut.