Burley Solo ST - Manual (Page 11)

Safety Checklists
Check Before Each Ride:
Wheels tightly and securely attached
Tires inflated to recommended pressure on tire side wall
Hitch properly secured with safety strap in place
Tow bar locked securely in place
Maximum load 75 lbs (34 kg) for single trailers and 100 lbs (40 kg by law in Europe) for double trailers
Bicycle safety check, especially brakes and tires
Helmet for passengers and cyclist
Safety flag in place
All seat straps properly attached
Children properly secured with harnesses and lap belt
Monthly Checklist:
Inspect tow bar, hitch, frame tubing, flex connector and hardware for damage
Inspect tires for wear and cracks
Inspect wheels for trueness and cracks
Inspect wheel bearings for wear
Inspect fabric parts for rips, abrasion, or missing or damaged hardware
Contact your Authorized Burley Dealer for replacement of any damaged or worn-out parts
Maintenance and Storage
Hitch and Tow Bar Maintenance
Store trailer indoors if possible. Do not use or store trailer at temperatures below 32˚F (0°C), as hitch flex connector can
become brittle and possibly break, causing an accident resulting in serious injury.
Fabric Care
Hand wash fabric parts with mild soap or detergent and warm water. For heavy soiling, use a nylon bristle brush. Do not use
bleach. Line-dry trailer cover. Polyester fabric will eventually fade, especially when exposed to direct sunlight. Wipe dry
(to help avoid mildew) and store out of direct sunlight in a dry, well ventilated area, or use a Burley Trailer Storage Cover to
protect your trailer. Clean windows with a damp soft cloth. Cover window may crack if trailer is stored below 32°F (0°C).
Replace any damaged parts.
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
B U R L E Y D ’ L I T E S T A N D S O LO S T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N UA L 11