AEM 30-3437 Series 2 AEMnet Adapter - Manual (Page 5)

Page 5
3. If the screwdriver does not fit in the area of the plug, a ground paper clip can be used to
release the tabs of the plug as shown in figure 6.
Figure 6: Grind a paper clip like this
INSTALL AEMNET ADAPTER HARNESS
4. Table 2 below lists the corresponding CAN1L and CAN1H pin locations for each Series 2
EMS.
CAN1L (Green wire) CAN1H (White wire)
EMS Adapter p/n LOCATION LOCATION
30-6610 30-3437 12 69
30-6611 30-3437 12 69
Table 2: CAN1L and CAN1H pin locations
Figure 7 shows the connector for the 6610 and 6611 EMSs.
Figure 7: Wire-side view of pinout for 6610 and 6611 EMS