Configuring the series 2 ems – AEM 30-3437 Series 2 AEMnet Adapter User Manual
Page 7
Advertising
Page 7
CONFIGURING THE SERIES 2 EMS
The AEMnet data stream is compatible with version AEM25 01v23 firmware and later. To
activate the AEMnet data stream, open AEMTuner and go to Wizards > Setup Wizard and
select the AEMnet Data Stream. See figure 10 below.
Figure 10: Selecting the AEMnet Datastream
With the AEMnet enabled, the Series 2 EMS broadcasts information as shown below in figure
11.
Figure 11: AEMnet Data
Advertising