AEM 30-3903 Infinity Plug & Play Harnesses - Volkswagen 2002-2005 MKIV Golf/Jetta 1.8T - Manual (Page 12)

3903-MKIV 1.8T 12
© 2014 AEM Performance Electronics
Connect the OEM boost sensor
connector to the AEM MAP sensor
adapter harness.
Installation complete. It is suggested to re-connect the battery ground cable and test that the Infinity turns on and
is able to be comm'ed up with with a PC before replacing the plastic cowl. The software should indicate that the
EMS firmware needs to be updated if this is the first time the EMS has been powered on and comm'd up with with
a PC.
Re-installation of plastic cowl is the reverse of removal.