AEM Infinity Supported Applications - Mazda 1986-2002 16B & 20B Rotary - Manual (Page 15)

Infinity Supported Application 15
© 2014 AEM Performance Electronics
Cam/Crank
In the Wizard Cam/Crank tab confirm the following setting:
Mazda Rotary (1986–2002)
There is also the option to use a crank missing tooth without a cam sync. In this case, select the proper
Sensor Selection and then expand the section shown below. Check the Cam Sync Generator option.
The Present Teeth Threshold and Missing Teeth Threshold are for diagnostic purposes and should not be
adjusted.
Ignition Sync
Add a text grid control to your layout and select the following channels. Make sure their values match
the settings below for initial timing sync.
TrigOffset [degBTDC] = 18.0
CamSyncAdjustment = 11.0