AEM Infinity Supported Applications - Mazda 1986-2002 16B & 20B Rotary - Manual (Page 4)

4
© 2014 AEM Performance Electronics
Figure 1: Pin-side connector view showing the 12V terminals in RED.
Procedure to Modify Wiring
STEP 1
Loosen hose clamp at the end of the intake elbow and twist air hose out of the way. Remove the 4 nuts
that secure the intake elbow to the throttle body and remove intake elbow.
STEP 2
Locate upper connector for Oil Metering Pump, which can be found near the power steering pump.