AEM Infinity Supported Applications - Mazda 1986-2002 16B & 20B Rotary - Manual (Page 5)

Infinity Supported Application 5
© 2014 AEM Performance Electronics
STEP 3
Press and hold tab on connector shown while pulling both connector bodies apart.
STEP 4
Using a small flat head screwdriver or pick, gently pry the yellow retainer out of the connector.
STEP 5
Using a small flathead screwdriver or pick, pull the locking tab away from terminal. While the tab is
pulled away, PUSH the terminal down into the connector using needle nose pliers. There will be
resistance, so push carefully to avoid damaging the connector or bending the terminal.