Blue Microphones VPW425 - Manual (Page 11)

ViewSonic VPW425 9
External Audio Connections
Connecting External Amplified Speakers
1. This monitor can be connected to an external set of ampli-
fied speakers using the AUDIO OUT jacks located on the
back of the monitor. In addition, this monitor is equipped
with a small 3.5mm phono style plug for remote turn-on
applications that will automatically send a remote turn-on/
off signal to the external amplified speakers.
2. Connect the red (R) and white (L) AUDIO OUT jacks from
right side of the connector panel to the external amplified
speaker.
3. As an option, you may use the remote turn-on plug. Please
note that not all external amplified speakers can accept
remote-turn on signals.
Connecting to an External Amplifier
1. This monitor can be connected to an external amplifier using
the AUDIO OUT jacks located on the back of the monitor. In
addition, this monitor is equipped with a small 3.5mm phono
style plug for remote turn-on applications that will automati-
cally send a remote turn-on/off signal to the external ampli-
fier.
2. Connect the red (R) and white (L) AUDIO OUT jacks from
right side of the connector panel to the external amplifier or
receiver.
3. As an option, you may use the remote turn-on plug. Please
note that not all external amplifiers can accept remote-turn on
signals.
Using the Subwoofer Out (Connecting a Subwoofer)
1. This monitor is equipped with a subwoofer output for con-
necting to an external amplified subwoofer.
2. Connect a RCA cable from the subwoofer output jack to the
external subwoofer.
Note:
„ The AUDIO OUT RCA jacks can be
set to either Fixed or Variable audio
output levels. Please see page 22 for
additional explanation of this feature.
„ The RCA subwoofer outputs frequen-
cies below 120Hz. The subwoofer
will use the same Fixed or Variable
audio output setting as AUDIO OUT
RCA jacks.
„ The 3.5mm phono/earphone output
level is always used for remote turn
on/off applications.