Passcode setting – Blue Microphones VPW425 User Manual

Page 26

Advertising
background image

24

ViewSonic VPW425

Parental Guide Table

PASSCODE Setting

Overview

The security passcode setting is used to limit access to V-Chip (Parental Guide) and Channel Lock

functions. The same security passcode is used for both functionality. By default, this monitor is
shipped with the security passcode set at 0000.

Changing the Passcode

To change the security passcode:

1. Press the MENU +/- keys on the remote or the front control panel

to display the OSD menu.

2. Use the ADJ +/- keys to navigate to “TV” OSD submenu.

3. Use the MENU +/- keys to scroll to the “SET PARENTAL

CODE” selection.

4. Press the ADJ + key to set the selection to “ENABLE”. As soon

as you press this button, the Passcode setting menu will be dis-

played (see Figure 1).

5. Press the default factory passcode 0,0,0,0 if you’re setting this

passcode for the first time. If you’ve previously set the passcode,

then enter your previously set passcode. If it is entered correctly,

then a new passcode menu will be displayed (see Figure 2).

6. Enter a new 4-digit passcode by using the number keypad. Once

entered, you will be prompted to re-key the same passcode to ver-

ify your setting (see Figure 3).

7. After setting the new passcode, the new passcode will be applica-

ble to all of your previous set Channel Lock or V-Chip functions.

Notes:
„ When you are entering the 4-digit passcode, pelase enter the digits

slowly and make sure taht the monitor confirms the reception of

the code. The monitor will change from “?” to “+” as it received

the passcode.

„ If you incorrectly enter the wrong passcode three times, the until

will automatically go back to the “TV” OSD sub-menu. Repeat

the above procedure to reset your passode.

„ If you incorrectly enter “NEW PASSCODE” three times, the mon-

itor will go back to the “Press NEW PASSCODE” step and

request that you set the new passcode again.

For Parental Guideline
FV: Fantasy Violence
D: Sexually Dialog
L: Adult Language
S: Sexual Situations
V: Violence
TV-Y: All Children
TV-Y7: Older Children

TV-G: General Audience
TV-PG: Guidance Suggested
TV-14: Strongly Cautioned
TV-MA: Mature Audience

For MPAA Rating
G: General Audience
PG: Parental Guidance
PG-13: Strongly Cautioned
R: Restricted
NC-17: No One Under 17

Figure 1

Figure 2

Figure 3

Advertising