Blue Microphones VPW425 - Manual (Page 21)

ViewSonic VPW425 19
Sleep Timer Settings
Setting Sleep Timer Using OSD
To set the sleep timer using the OSD screen:
1. Press the MENU +/- keys on the remote or the front control panel.
2. Use the ADJ +/- keys to navigate to “OTHER” OSD sub-menu as dis-
played below.
3. Use the MENU +/- keys to navigate to SLEEP function.
4. Use the ADJ +/- keys to set to ON.
5. The monitor will function normally until the 1-minute mark. At the 1-
minute mark, the sleep timer will display a second by second count-
down clock to notify that you that the monitor is about to turn off.
Setting Sleep Timer Using Remote Control
To set the sleep timer using the remote control:
1. Press the SLEEP TIMER key on the remote. This will display the
sleep timer display on the upper right corner of screen.
2. Pressing the SLEEP TIMER key again will cycle the sleep timer
through all the preset times.
3. When setting is complete, simply press the DISPLAY key to hide the
sleep timer display. Your sleep timer is now running in the back-
ground.
4. The monitor will function normally until the 1-minute mark. At the
1-minute mark, the sleep timer will display a second by second
countdown clock to notify that you that the monitor is about to turn
off.
5. If you wish to turn the sleep timer OFF before it shuts itself off, sim-
ply press the SLEEP TIMER key again and cycle through all the pre-
set times until “SLEEP: OFF” is displayed.
Sleep Timer On/Off
To turn on sleep timer, switch to
ON position. To turn OFF sleep
timer, switch to OFF.
Timer Setting
You can set the turn-off timer
from 1 to 120 minutes. Use the
ADJ +/- keys to set any number
between 1 and 120.