Blue Microphones VPW425 - Manual (Page 13)

ViewSonic VPW425 11
Powering ON / OFF
Using Front Panel or Remote Control
1. Make sure the monitor is plugged into the wall out-
let and the main AC switch located in the rear of
the monitor is switched to ON position. If the
power is plugged in and the AC switch is on, the
STATUS LED will illuminate in solid yellow
color.
2. Press the POWER button on the front panel or the
remote control.
3. The monitor will now turn on after a brief pause.
The STATUS LED will now turn green to indicate
power on status.
4. To turn power off, simply press the POWER but-
ton on the front panel or the remote control once
again.
Using Discrete Power ON/OFF Keys
1. The discrete POWER ON/OFF keys sends two dis-
crete signals to the monitor.
2. To turn power on, simply press the POWER ON
button. If the monitor is turned on already, press-
ing this button will have no effect.
3. To turn off power, simply press the POWER OFF
button. If the monitor is already turned off, press-
ing this button will have no effect.
Selecting Signal Source
Using Front Panel or Remote Control
1. Press the INPUT key on the front panel or the
INPUT SELECT key on the remote control.
2. Pressing the INPUT key will cycle the monitor
thru all available input signal sources in the fol-
lowing order:
Using Direct Input Selection Keys
1. If you prefer not to cycle thru all available inputs,
you can use the Direct Input Selection keys located
towards the bottom of the remote control.
2. Simply select the input that you would like to
switch to and press the Direct Input Selection key
for that input.
Notes:
„ If TV tuner is not installed, TV option will not be
available.
„ Some of the Direct Input Selection keys will not be
applicable for this monitor.
For AV mode, use AV1.
For S-Video, use AV2.
Input Select
(Toggle)
Direct Input
Selection Keys
POWER(Toggle)
Status LED
„ Not Illuminated - No AC
Power detected
If the main power switch
(rear of panel) is turned off,
this LED will not illuminate.
„ Solid Yellow - Standby
(Power OFF) with AC
power detected
The LED will illuminate in
yellow color if the monitor is
shut-off but the main power
cord is plugged into the back
of the unit.
„ Solid Green - Power ON
Discrete
POWER ON/OFF
USING THE MONITOR-BASICS