Prepare the installation 2. measure installation, Caution – Best WP29M User Manual

Page 6

Advertising
background image

Remove the installation kit from inside the hood.

Make sure that the following items are included:

- Wood strip (screwed on back of hood)

- Installation manual

- Accessories including:

• Evolutionary™ hybrid baffle filters (3 for hoods up to 54” width, 4 for 60” width)
• Shielded halogen lights (GU10 type base, 120 V, 50 W) (4 for hoods up to 42” width, 6 for hoods from 48” to 60” width)
• Bag of parts including:

(4) flat head screws #10-2’’, (8) screws #8 x 3/4’’, (4) nuts #10-32, (2) wall anchors, (2) washers 3/16’’ ID x 3/4’’ OD

Parts sold separately:
- Interior blower Model P6 (includes rough-in kit), for either ducted or non-ducted installation.
- Interior blower Model P12 (includes rough-in kit), for ducted installation only.
- In-line blower assembly ILB3, ILB6, ILB9 or ILB11 (all include transition and rough-in plate), for ducted installation only.
- Exterior blower assembly EB6, EB9, EB12 or EB15 (all include rough-in plate), for ducted installation only.
- Transitions, duct, elbows, dampers, wall and roof caps. Refer to pages 3 and 4 for a complete list of venting options and model

numbers.

- Non-duct kit ANKWPD Series, mandatory for non-ducted installation.
- Optional decorative flue AEWP Series, for ducted installation only.

- Optional flat top cover ADPWP Series, for ducting through back of hood, intalled on hood or installed on the optional decorative

flue AEWP Series. Can also be installed on the non-duct kit flue ANKWPD Series.

- 6 -

3. PREPARE THE INSTALLATION

2. MEASURE INSTALLATION

Dimensions for the most common installation are shown beside.
The minimum hood distance above cooktop must not be
less than 24’’. A maximum of 30” above cooktop is highly
recommended for best capture of cooking impurities.
Distances over 30” are at the installer and users discretion.

Ceiling

Cabinet, soffit,

decorative flue or

non-duct kit flue

Standard 36” (914 mm)

high cooktop

Top of wood
mounting strip
A + 0.25’’ (6 mm)

Hood

A

HH0072A

Minimum distance between

the hood and cooktop:

24’’ (610 mm)

Recommended maximum

distance between the hood

and cooktop: 30’’ (762 mm)

MINIMUM AND MAXIMUM DISTANCE

OVER COOKTOP

CAUTION

When performing installation, servicing or cleaning the unit, it is recommended to wear safety glasses and
gloves.

Advertising