Apple LaserWriter 12/640 PS - Manual (Page 90)

m
Remote cancel model Used for remote printer job removal; type rcmodel
m
Remote status model Used for remote printer queue status; type rsmodel
m
Printer class Optional
m
Make this the system default printer? Check the box to make this printer the
default printer for all workstations on this segment of the network.
m
Allow anyone to cancel requests Check this box if anyone should be able to
cancel requests.
m
Remote printer on a BSD system? Because this printer is a Berkeley-style
remote printer, check this box.
7 Select the OK button.
A message appears asking you whether you want to add the printer to the
Printer’s subpanel.
8 Click Yes or No.
9 Click OK.
10 Choose Exit from the File menu.
11 Click the Exit SAM button.
12 To test the connection, type the ping command from a workstation on the same
subnet as the printer:
ping printer_IP_name
If the ping command responds by telling you that the printer is alive on the
network, the address assignment was successful.
If the ping command does not respond, or tells you the printer was not
found, then the address assignment failed. Try the steps in this procedure
again, making sure you type the printer’s Ethernet address exactly as it
appears on the startup page. If it still doesn’t work, see the troubleshooting
suggestions in Chapter 12.
13 Test printing with the following command:
lp -d queue_name filename
90 Chapter 4