Synergy 5410 - Jeep JK Front Bumper User Manual
Page 10
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
13. Install the winch and fairlead at this time before the skid plate is installed. A
hawse type fairlead is required; a roller fairlead does not fit in the bumper. The
hook on the front of the winch mount is provided to hold the hook when the cable
is spooled in, it is not a tow or recovery point.
The bumper and winch mount installation is now complete; proceed with the remaining
instructions if you are installing the Poly Performance 5410-03 or 5410-03-RUBI skid
plate.
14. Install the skid plate outer frame nut tabs. Use a ½” x 1 bolt and flat washer in the
middle hole in the frame bracket. Do not tighten this bolt yet; leave it loose
enough to move around to install the lower bolt thru the skid plate.