Synergy 5410 - Jeep JK Front Bumper User Manual
Page 2
Advertising
SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
Steps 3-9 only apply if you are installing the Poly Performance 5410-03 or 5410-03-
RUBI front skid plate, if you are not at this time, skip to step 10
3. Cut off the bar that goes underneath the frame in front of the steering draglink.
Cut the front and back parts of the bracket flush with the sides. Deburr any sharp
edges and paint any bar metal with touch up paint.
4. Remove the rear sway bar mounting bushing bolt on both sides.
Advertising