Synergy 8020-20/8040-20 - Jeep JK 2 - Manual (Page 9)

22) With front suspension hanging free, remove the brake line attachment bolt at the frame. Bolt 2 in IMG
4.1 below. Retain this bolt as it will be reused.
IMG 4.1 brake line removal
23) On 2012+ models, remove the brake line attachment bolt at the coil spring as indicated in IMG 5.1
below.
IMG 5.1
24) With brake lines loosened, support the axle and remove the shocks. **Note** the shocks are keeping
the suspension from fully drooping out. Once shocks are removed, lower the axle to the point of coil