Prestart inspection checklist – Snorkel TB66J User Manual

Page 51

Advertising
background image

Chapter 7 – Prestart Inspection

TB66J – 0083740

47

Prestart Inspection Checklist

Item

Inspect For

OK

Operator’s Manual

In place, all pages readable and intact

Engine

Oil Level

Between full and add marks

Coolant

Liquid cooled engines – proper fluid level
Air cooled engines – air intake and fan free of

obstructions, belt in good condition

Radiator

Cap tight, good condition and clean

Fuel tank and line

Tank full, cap in place and tight/no leaks

Air filter

Clear indicator

Charging system

Proper operation

Cold weather start kit

No damage or deformation

Electrical System

Battery

Condition and charged for proper operation

Battery fluid level and terminals

Proper level/clean, connectors tight

Cables and wiring harness

No wear or physical damage

Hydraulic System

Fluid level

Between add and full marks, cap in place and tight

Fluid filter

Verify operation in the green zone

Hoses, tubes and fittings

No leaks

Cold weather warm-up kit

Proper operation

Tires and wheels

Good condition

Lower Control Station

Operating controls

Proper operation

Emergency stop and emergency power

Shuts off lower controls/proper operation

Emergency Lowering

Proper operation

Level Sensor

Sounds tilt alarm

Flashing Lights

Proper operation

Structures

Weldments – Chassis, turntable, booms, platform, etc.

Welds intact, no damage or deformation

Slide pads

In place, no damage or deformation

Fasteners

In place, tight, and no damage

Wire ropes

No deformation or broken strands

Upper Control Station

Guardrail system and lanyard anchors

Welds intact, no damage or deformation

Operating controls – Boom functions, drive, brakes, etc.

Proper operation

Emergency stop and emergency power

Shuts off upper controls/proper operation

Horn

Sounds when activated

Electrical power outlet – GFCI

Proper operation

Driving and work lights

Proper operation

Platform control cover

In place and proper operation

All Motion Alarm

Sounds when machine is operated and/or driven

Sandblast Protection Kit

In place and proper operation

Air Line to Platform

No damage or deformation, caps in place

Driving and Platform Work Lights

No damage or deformation, proper operation

Tow Kit

In place, no damage or deformation

Platform Glazier Package

Good condition

Bump Guard System

Good condition, proper operation

Placards and Decals

In place and readable

Advertising