Eppendorf Innova 40R Shaker - Manual (Page 30)

Operation
New Brunswick Innova 40/40R Shaker
English (EN)
30
5.9.1 Changing the communication mode
In the RS232 screen:
1. Turn the Control knob to highlight the Mode status (see Tab. on p. 30).
2. Press the Control knob.
The current setting will flash.
3. Turn the Control knob to select make your selection (see Tab. on p. 30).
4. Press the Control knob to save your setting.
Tab. 5-2: Communication mode
5.9.2 Changing the baud rate
In the RS232 screen:
1. Turn the Control knob to highlight the current setting.
The settings are: 9600 , 19200 , and 38400 .
2. Press the Control knob.
The current setting will flash.
3. Press the Control knob to save your selection.
Mode Application
Off The RS-232 port is not open to communication in either direction.
Slave The shaker can be fully controlled from the computer.
Talk The shaker sends current value reports to the computer once per
minute.
Monit (Monitor) The shaker responds only to "Report Requests".