JLG 3246E2 ANSI Operator Manual - Manual (Page 34)

SECTION 3 - USER RESPONSIBILITIES AND MACHINE CONTROL
3-8
– JLG Lift – 3120736
7. High Drive Speed Switch
The high drive speed switch, when used in conjunc-
tion with the joystick being operated in the drive
mode, provides additional oil flow to the drive circuit
for increased travel speed. To operate high drive,
depress the high drive speed switch either simulta-
neously with the drive switch or while operating the
drive function.
DO NOT USE HIGH DRIVE SPEED WHEN DRIVING IN
CLOSE QUARTERS OR WHEN DRIVING IN REVERSE.
IF HIGH DRIVE IS SELECTED WHEN OIL TEMPERATURE IS
VERY COLD BELOW 40° F (4°C.) HIGH DRIVE WILL NOT
ENGAGE IMMEDIATELY. AS OIL WARMS ABOVE 40° F
(4°C). IF HIGH DRIVE IS SELECTED, IT WILL ENGAGE
AUTOMATICALLY WHILE DRIVING.