JLG 3246E2 ANSI Operator Manual User Manual
Page 55
SECTION 4 - MACHINE OPERATION
3120736
– JLG Lift –
4-5
MAKE SURE DECK EXTENSION IS PINNED IN PLACE BEFORE
DRIVING MACHINE.
4.8
PARKING AND STOWING
NOTE: When parking battery-powered units overnight, bat-
teries should be charged in accordance with instruc-
tions in Section 2 to ensure readiness for the
following workday.
Park and stow machine as follows:
1.
Drive machine to a reasonably well-protected and
well-ventilated area.
2.
Ensure platform is fully lowered.
3.
Position emergency stop switch to off position.
4.
If necessary, cover the instruction placards, caution
and warning decals so that they will be protected
from hostile environment.
5.
Chock at least two wheels when parking machine for
an extended period of time.
6.
Turn switch to off and remove key to disable
machine from unauthorized use.
4.9
PLATFORM LOADING
The platform maximum rated load capacity is shown on a
placard located on the platform and the manufactures
nameplate located at the front of the machine and is
based upon the following criteria.
1.
Machine is positioned on a smooth, firm and level
surface.
2.
All braking devices are engaged.
3.
Maximum platform capacity for each model in its
standard configuration is as follows:
1532E2 - 600 lb (270 kg)
1932E2 - 500 lb (230 kg)
2032E2 - 750 lb (340 kg)
2632E2 - 500 lb (230 kg)
2646E2 - 750 lb (340 kg)
3246E2 - 700 lb (320 kg)
4.
Maximum capacity of the manual platform extension
is 250 lb. (120 kg) - 1 person.
NOTE: The weight in the platform should be uniformly dis-
tributed in the platform. The total combined weight of
personal, tools and supplies must not exceed the
above figures.
4.10 SAFETY PROP
THE SAFETY PROP MUST BE USED WHENEVER MAINTENANCE
PERFORMED ON THE MACHINE REQUIRES THE SCISSOR ARMS
TO BE RAISED.
To engage the safety prop, raise the platform, then
remove the prop from the prop bracket until it hangs verti-
cally. Lower the platform until the safety prop rests on the
point provided on the arm. Maintenance can now begin.
To store the safety prop, raise the platform so that the
prop can be rotated counterclockwise until it rests on the
bracket provided on the scissor arms.