JLG 4017 Operator Manual - Manual (Page 115)

Section 8 - Specifications
8-3 3121857
Frame Leveling............................................................................................ 9 degrees
Dimensions
Overall Height................................................................................2.520 mm (99.2 in)
Overall Width.................................................................................2.380 mm (93.7 in)
Cab Width............................................................................................890 mm (35 in)
Track Width ...................................................................................1.920 mm (75.6 in)
Wheelbase .................................................................................. 2.850 mm (112.2 in)
Length at Front Wheels ...............................................................4.758 mm (187.3 in)
Length at Fork-Holder Plate ........................................................6.093 mm (239.9 in)
Ground Clearance ............................................................................420 mm (16.5 in)
Turning Radius Over Tires ..........................................................3.800 mm (149.6 in)
Turning Radius at Forks ..............................................................5.400 mm (212.6 in)
Gross Vehicle Weight with Forks............................................... 12.098 kg (26,671 lb)
Front Axle Weight........................................................................ 5.449 kg (12,013 lb)
Rear Axle Weight ........................................................................ 6.649 kg (14,659 lb)
Noise Emission Level
• The telehandler is approved under the applicable EC directives.
• The LWA sound power level is shown on the machine.
• To avoid any increase in noise emission, after maintenance and repair work, all
panels and other sound absorbing materials must be replaced in their original
condition. Do not modify the machine in such a manner as to increase noise
emissions.
Telehandler Vibration
When the telehandler is used in the manner intended the vibration load values
measured at the operator’s seat are less than or equal to the test vibration values for
the corresponding class of machinery per ISO 7096. The “azw” vibration
acceleration values measured according to prEN 13059, therefore meet the
requirements for whole body vibration protection in EN 474-1.