JLG 4017 Operator Manual - Manual (Page 45)

Section 2 - Pre-Operation and Controls
2-21 3121857
Steering Column Adjuster
• Follow “Shut-Down Procedure” on page 3-4.
• Loosen the knob (8).
• Place the steering column in the desired position.
• Retighten the knob.
WARNING
TIP OVER/CRUSH HAZARD. Bring telehandler to a complete stop and shutdown
engine before adjusting steering column. A sudden change in direction of travel
could reduce stability and/or cause load to shift or fall. Failure to comply could
result in death or serious injury.