JLG 4017 Operator Manual - Manual (Page 47)

Section 2 - Pre-Operation and Controls
2-23 3121857
Attachment Functions
• Attachment tilt is control by the rocker switch (2). Push the rocker switch up to tilt
attachment forward (down); push the rocker switch down to tilt attachment back
(up).
• Auxiliary Hydraulics (optional) button (6) controls function of attachments that
require hydraulic supply for operation. See Section 4 - Attachments for approved
attachments and control instructions.
Outrigger Functions
• Button (3) controls the left outrigger. Press and hold the button; move the joystick
forward to lower the outrigger; move the joystick back to raise the outrigger.
• Button (5) controls the right outrigger. Press and hold the button; move the
joystick forward to lower the outrigger; move the joystick back to raise the
outrigger.
• Button (4) controls both outriggers simultaneously. Press and hold the button;
move the joystick forward to lower the outriggers; move the joystick back to raise
the outriggers.
WARNING
TIP OVER HAZARD. Outriggers increase stability and load capacity only if they
are used properly. Using outriggers on soft surfaces could cause telehandler to
tip over and result in death or serious injury. Always ensure surface can support
telehandler and load.