Fork hook, Fork hook -20 – JLG 4017 Operator Manual User Manual
Page 86
Section 4 - Attachments
4-20
3121857
Fork Hook
P/N
Description
Weight
2700097
Fork Hook 4 ton.................................... 33,6 kg (74 lb)
Use Fork Hook Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 4-2.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
Fork Hook Control:
The attachment tilt rocker switch (2) located on the boom joystick (1) controls fork
hook tilt.
• Push rocker switch down to tilt up.
• Push rocker switch up to tilt down.
Installation Procedure:
• Refer to “Attachment Installation” on page 4-7.
• Secure the fork hook to the forks by sliding the fork hook onto the parent forks
and install the retaining pin behind the vertical shank of the fork.
OZ0740