Step 2: setup the receiver – IOGear GWHDMS52MB User Manual
Page 16
Advertising
1
2
3
16
Step 2: Setup the Receiver
HD Projector or HDTV
1. Connect the Receiver Power Adapter into the Mini USB power jack.
2. Connect an HDMI cable to the HDMI OUT port on the Receiver to an HDMI IN port on the
HDTV or HD Projector.
3. Connect the IR Sensor Extender cable to the IR IN port on the back of the Receiver.
Please refer to Page 17, Step 3B for more detailed setup instructions.
Advertising